Scissor Lift License Mesa

Scissor Lift License Mesa - The is an inherent chance in operating a scissor lift, as with all types and kinds of powered work tools will require proper handling to be able to prevent accidents which may cause damage or injuries. Businesses need to ensure that employees operating this equipment have the needed experience.

Untrained personnel must not be permitted by their companies to utilize scissor lifts. The lift is designed to lift materials and people to varied heights. Failure to understand and fully abide by safety standard could cause injuries for the users or damage to the lift.

There are no regulations governing the utilization of fall protection for scissor-lift users. However, manufacturers could recommend the use of fall protection and in some situations tying off in scissor lifts may be required by employer guidelines, local regulations or job-specific risk assessment.

Prior to utilizing the equipment, the scissor-lift operator needs to perform a thorough check to ensure the machine is in good working condition. This is the operator's job, even if the unit has already been in service that same day. The machine's operator's handbook contains a pre-operation checklist.

Examples of what to look for when doing a pre-operation inspection consist of checking tire-inflation pressure, and checking ground controls and controls in the platform to be able to make sure they are working. When extending or retracting the boom, look for delayed movement on the fly section that may indicate cables are loose. While operating the controls, make certain that the emergency stop switches are working. Operate functions against the machine's cutout switches. Test the boom control system by cycling a boom lift to the furthest extent of its operating envelope. Safety limiters must stop the unit automatically before it moves into an unstable position, if they are working correctly. If they aren't, turn off the lift and ensure that it is fixed before it is utilized for a second time.

Proper and safe operating measures must be followed at all times. Levers must be operated with even, controlled pressure. A control lever must never be pushed from one position to the opposite position. The lever should be shifted to neutral, before stopping, and afterward proceeding in the desired direction. When released, levers and control switches should automatically return to the neutral position. Depress the foot switch before operating platform controls.

Click to Download the pdf